Vibration moves the conveyed material in the desired direction
When conveying bulk goods, conveyor troughs are set in motion by BRECON external vibrators mounted in counter rotating pairs. The vibrators generate linear oscillation which continously jog the conveyed material at an angle of approximately 30° in such a way that a chain of micro projectile movement is produced: The bulk material “flows”. Since it is aimed to achieve large oscillations, these applications use vibrators with 1500 or 1000 vibrations per minute .
All vibrators are available for 50Hz and 60Hz main frequency, special voltages (e.g. 500V) are available on request. We would be pleased to help you selecting the correct vibrator for your application.
For customized products and more information, please do not hesitate to contact us. We will be glad to offer you our technical consultation.
Conveying and Sieving
The functionality and choice of the external vibrators at the conveying and sieving is identical and therefore is looked at together also (The external vibrator is only used differently at sieving). At conveying and sieving the working conditions are rough, large material quantities have to be processed and little room is available for the vibration drive.
Whether 1000, 1500 or 3000 vibrations/min is worked with, depends on the bulk material to be processed and the velocity of conveying to be achieved. Here applies the following rule: High vibration speed at about 3000 vibrations/min is appropriate for fine-grained goods and low vibration frequency at about 1000 vibrations/min for coarse-grained goods.
For customized products and more information, please do not hesitate to contact us. We will be glad to offer you our technical consultation.
